Перейти к основному содержанию

Changes to Step #1

Edit by Andrew Nichols

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Remove the three screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] Remove theThere is a 5.6mm screw in the lower case holding the disk drive in and pull it outin. Unscrew is to allow the drive to be removed.
[* black] Remove the three screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] Remove theThere is a 5.6mm screw in the lower case holding the disk drive in and pull it outin. Unscrew is to allow the drive to be removed.