Перейти к основному содержанию

Изменения к шагу №3

Отредактированно Toni Pipes -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* yellowblack] The fan is permanently attached to the silver heat sink next to the RAM.
[* yellow]
To completely remove the parts, you also need to loosen the heat sink’s four screws with a Phillips #00 screw driver.
[* icon_note]
Take out the screws in the numerical order shown on the heat sink.
[* yellowblack] The fan is permanently attached to the silver heat sink next to the RAM.
[* yellow]
To completely remove the parts, you also need to loosen the heat sink’s four screws with a Phillips #00 screw driver.
[* icon_note]
Take out the screws in the numerical order shown on the heat sink.