Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Terrence -

Правка одобрена автор Terrence

До
После
Без изменений

Шаг Линий

[* icon_reminder] FlipAfter taking out the three(3) screws, flip the laptop over,over so that the keyboard side up.
[* blackicon_caution] Carefully lift speaker grille / button panel away from the upper case by pulling up on the two corners closest to the keyboard. If caution is not taken, permanent damage may occur.
[* blackblue] Remove the center cable from its connector on the button panel. Then, gently release the friction locks that secure the left and right ribbon cables by pushing them away from their connectors. The ribbon cables will slip out of their connectors.
[* icon_reminder] FlipAfter taking out the three(3) screws, flip the laptop over,over so that the keyboard side up.
[* blackicon_caution] Carefully lift speaker grille / button panel away from the upper case by pulling up on the two corners closest to the keyboard. If caution is not taken, permanent damage may occur.
[* blackblue] Remove the center cable from its connector on the button panel. Then, gently release the friction locks that secure the left and right ribbon cables by pushing them away from their connectors. The ribbon cables will slip out of their connectors.

Изображение 2

Старая версия

Новая версия