Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Henk Poley -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] Remove the harddisk plate, and the harddisk. Remove the philips screw that just became visible (not shown). This screw keeps the palmrest in place.
[* black] Slide the optical drive from the hotswap bay. Remove the two philips screw that just became visible (not shown). These keep the arm rest secured.
[* black]
Remove the 5.8 mm Phillips screws securing the motherboard to the lower case.
[* red] Remove the harddisk plate, and the harddisk. Remove the philips screw that just became visible (not shown). This screw keeps the palmrest in place.
[* black] Slide the optical drive from the hotswap bay. Remove the two philips screw that just became visible (not shown). These keep the arm rest secured.
[* black]
Remove the 5.8 mm Phillips screws securing the motherboard to the lower case.