Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Terrence -

Правка одобрена автор Terrence

До
После
Без изменений

Шаг Линий

[* red] Loosen the two captive screws on the right hand side of the hard drive cover. The screws will remain attached to the cover.
[* blackblue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try to gently pry it out with a flat head screwdriver.
[* blackorange] Remove the one screw under the hard drive. This will help release the motherboard in later steps.
[* blackblue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try to gently pry it out with a flat head screwdriver.
[* blackorange] Remove the one screw under the hard drive. This will help release the motherboard in later steps.

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия