Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Terrence -

Правка одобрена автор Terrence

До
После
Без изменений

Шаг Линий

[* red] Remove the screw above the RAM access cover that holds the CD drive in place. Then, slide the drive to the left out of the case. Be careful not to pull the front off of the tray itself.
[* blue] Remove the 3three(3) screws along the edge that are revealed after removing the CD drive. These screws hold the top bezel to the bottom frame.
[* blue] Remove the 3three(3) screws along the edge that are revealed after removing the CD drive. These screws hold the top bezel to the bottom frame.