Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #16

Редактировать с помощью Terrence -

Правка одобрена автор Terrence

До
После
Без изменений

Шаг Линий

[* blackred] Remove the final screw holding the motherboard in place. Then gently lift the motherboard up vertically. We need to remove a few cables.
[* blackblue] Remove the two marked cables. These will be tight. Do not pull by the wires. Carefully wiggle the connectors only. You ay find it easier to stand the case on edge and work the connectors loose using a small screwdriver or forceps, working through the RAM cover opening.
[* blackorange] Remove the final data cable near the front of the system board. The motherboard will be free. Lift up and towards the left to remove from the base.
[* blackred] Remove the final screw holding the motherboard in place. Then gently lift the motherboard up vertically. We need to remove a few cables.
[* blackblue] Remove the two marked cables. These will be tight. Do not pull by the wires. Carefully wiggle the connectors only. You ay find it easier to stand the case on edge and work the connectors loose using a small screwdriver or forceps, working through the RAM cover opening.
[* blackorange] Remove the final data cable near the front of the system board. The motherboard will be free. Lift up and towards the left to remove from the base.

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия