Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью James Loy -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Lay the camera on its front side.
[* black] Use finger to press down on camera's metal casing. Using other hand, lift the LCD screen straight up, making sure the LCD screen's ribbon cable slides free of metal casing.
[* icon_caution] Be very careful with the motherboard. Do not apply a force on the motherboard.
[* black] Camera,icon_reminder] When reassembling, LCD screen ribbon cable must go through its hole before attaching the back metal case, and tripod internal thread end can be separated nowcasing.
[* black] Camera,icon_reminder] When reassembling, LCD screen ribbon cable must go through its hole before attaching the back metal case, and tripod internal thread end can be separated nowcasing.

Изображение 2

Удален