Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью Jarrod Belsick -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Rotate the camera so it is laying on its front side. Then use your fingers to bendgently shift the motherboard assemblybody of the camera while holding onto the LCD screen so that the ribbon for the LCD display can pull freeslide through the slot in the metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the motherboard. Do not break it in attempts to get the LCD screen out.

[* black] Camera, metal case, and tripod mount screwfemale end can be taken out now, and may fall out during this processseparated now.
[* black] Rotate the camera so it is laying on its front side. Then use your fingers to bendgently shift the motherboard assemblybody of the camera while holding onto the LCD screen so that the ribbon for the LCD display can pull freeslide through the slot in the metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the motherboard. Do not break it in attempts to get the LCD screen out.

[* black] Camera, metal case, and tripod mount screwfemale end can be taken out now, and may fall out during this processseparated now.