Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью James Loy -

На одобрении

До
После
Без изменений

Шаг Линий

[* blackicon_note] Lay the camera on its front side.
[* black] Use fingeryour fingers to press down on camera's metal casing. Using other hand, lift the LCD screen straight up, making sure the LCD screen's ribbon cable slides free of metal casing.
[* icon_caution] Be very careful with the motherboard. Do not apply a force on the motherboard.
[* blackicon_note] Lay the camera on its front side.
[* black] Use fingeryour fingers to press down on camera's metal casing. Using other hand, lift the LCD screen straight up, making sure the LCD screen's ribbon cable slides free of metal casing.
[* icon_caution] Be very careful with the motherboard. Do not apply a force on the motherboard.
[* icon_reminder] When reassembling, LCD screen ribbon cable must go through its hole before attaching the back metal casing.