Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Thomas Leman -

Правка одобрена автор Thomas Leman

До
После
Без изменений

Шаг Линий

-[* black] Remove the keyboard and place upside down, so that the keys are on the work surface.
-[* red] Remove the four 3.0mm screws that attach the keyboard to the frame.
+[* icon_note] If you're not interested in replacing the keyboard, and are only interested in using this guide to replace another part, there is no need to follow the steps below
+ [* black] Remove the keyboard and place upside down, so that the keys are on the work surface.
+ [* red] Remove the four 3.0mm screws that attach the keyboard to the frame.