Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью esigourney -

Правка одобрена автор esigourney

До
После
Без изменений

Шаг Линий

-[* icon_note] If you're not interested in replacing the keyboard, and are only interested in using this guide to replace another part, there is no need to follow the steps below
- [* black] Remove the keyboard and place upside down, so that the keys are on the work surface.
- [* red] Remove the four 3.0mm screws that attach the keyboard to the frame.
+[* icon_note] This step is for replacing the keyboard only. If you are not replacing the keyboard, skip this step.
+ [* black] Lay the keyboard face down.
+ [* red] Locate and remove the four 3.00mm screws that attach the keyboard to the keyboard frame.