Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью lsward -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Loosen the goose-neck (adjustable quill stem) with an Allana 6 mm Allen wrench.
[* black] After loosening the goose-neckgoose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.
[* black] If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet.

[* black] Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance.
[* black] Make sure you don't raise quill stem above minimum insert line.
[* black] Loosen the goose-neck (adjustable quill stem) with an Allana 6 mm Allen wrench.
[* black] After loosening the goose-neckgoose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.
[* black] If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet.

[* black] Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance.
[* black] Make sure you don't raise quill stem above minimum insert line.