Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Isabel -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* black] Grind the location of the hole slightly until the surface feels a little rough.
[* black] Next, apply a thin coat of the rubber cement to an area that is about the same size of the patch to the location of the hole.
[* black] For best results wait until the rubber cement is try to the touch. 3 minutes or more. It does not matter it airing too long.
[* black] Finally, peel off the back of the patch, place it over the area of rubber cement with the hole centered, and then apply pressure with thumb until rubber cement is dry.