Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

+[title] Apply heat
[* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.