Почините Свои Вещи Сообщество Магазин

Возврат к шагу #2

Отредактированно Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Place the heated iOpener on the face of the watch.
-[* black] Leave the iOpener on the watch for at least a minute, to heat up the screen and soften the adhesive holding it to the case.
-[* black] You may need to reheat the iOpener, or move it around on the screen as parts of it cool, to completely heat the screen enough to pry it off.
+[* black] Leave the iOpener on the watch for at least a minute to heat the screen and soften the adhesive holding it to the case.
+[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.