Возврат к шагу #5
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Once you've opened the gap enough, insert the tip of a plastic opening tool and slide it along the bottom, to separate adhesive holding the screen to the case. |
|---|---|
| - | [* icon_caution] Be careful not to insert the opening pick too far—only about 1/8" (~3 mm) is necessary. |
| + | [* black] Once you've opened the gap enough, insert the tip of an opening pick under the glass. |
| + | [* black] Slide the pick along the bottom edge to separate adhesive holding the screen to the case. |
| + | [* icon_caution] Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables. |