Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* icon_note] The bracket that contains the display and digitizer cable connections is made up of an upper and lower piece. The connectors are secured to the lower, and the upper must be removed to disconnect them.
[* black] Use fine-tipped tweezers to grasp the lower half of the bracket.
+[* icon_note] There is a small metal tab that protrudes downward from the upper metal bracket.
+[* black] Insert a small (1 mm) flathead screwdriver between the tab and the lower bracket, and rotate the screwdriver to spread the gap.
+[* black] This will release two tabs that hold the upper bracket to the lower, and should free the upper bracket.