Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] The upper half of the display connector bracket is held at the upper end by a metal tab that fits into a slot in the lower bracket.
-[* black] Grab the upper bracket with your tweezers and slide it toward the top of the watch to disengage this tab and free the bracket.
+[* black] Grab the cover with your tweezers and slide it toward the top of the watch to free the final slotted tab, and remove the cover.
+[* icon_reminder] To reassemble, set the cover in place and slide it in the opposite direction to secure the large slotted tab. Then simply press down on the cover to click the other two smaller tabs into place.