Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью John Frazier -

Правка отклонена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* red] Using a Phillips head screwdriver, remove the screws shown in the image. They all have the letter "P" next to them.
+[* yellow] Carefully remove battery from cover and displace it over open area of circuit board. Battery supports Bios Chip memory
[* blue] Carefully unplug the connections shown.
[* icon_note] Don't forget the display cable. It is slightly to the right of the Dell logo at the top.
[* black] Also, the wireless cables on the right side may prevent moving the upper case out of the way.
[* black] Once the screws have been removed and the connections unplugged, use the plastic opening tool to gently separate the panel from the lower case.

Изображение 2

Старая версия

Новая версия