Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* red] Using a Phillips head screwdriver, remove the screws shown in the image. They all have the letter "P" next to them.
[* blue] Carefully unplug the connections shown.
[* blue] Don't forget the Monitor cable.
[* black] Also, the wireless cables on the right side may prevent moving the upper case out of the way.
-[* black] Once the screws have been removed and the connections unplugged, use the spudger tool to gently separate the panel from the lower case.
+[* black] Once the screws have been removed and the connections unplugged, use the plastic opening tool to gently separate the panel from the lower case.