Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Rich Davies -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* icon_caution] Remove the plastic case by gently bending back towards the screen. You can bend the screen all the way back if that helps.
[* icon_note] For the motherboard the optical drive will be removed already. However for the lower case it is not necessary that it be taken out.
+[* icon_caution] If you can not remove the upper plastic case (and LCD) from the lower case due to a wire still being in place its due to the WIFI adapter. Turn laptop over open up WIFI module access panel and remove the + and - leads for the WIFI antenna. This will allow the top of case to freely remove from bottom of case.