Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Philip Honnold -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] First off unplug the monitor from power as well as from the back of the computer. Find a flat surface and lay the monitor on its face so that you can get to the back of it. The screws that hold the monitor stand on are covered by a small plastic bezel ( shown in photo with the red arrow). This is held on with just pressure and if you squeeze itat the points mark with a blue circle it should pop free and them the bezel can be removed.
[* black] First off unplug the monitor from power as well as from the back of the computer. Find a flat surface and lay the monitor on its face so that you can get to the back of it. The screws that hold the monitor stand on are covered by a small plastic bezel ( shown in photo with the red arrow). This is held on with just pressure and if you squeeze itat the points mark with a blue circle it should pop free and them the bezel can be removed.