Перейти к основному содержанию

Изменения к шагу №18

Отредактированно Philip Honnold -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Last step is to reattach the monitor stand with the 8 screws that were removed and then to reattach the plastic bezel that covered them. Here is thata photo of the screws again for aligment reason. Remember theseto show alignment. These are the screw locations for the left hand set of wholesholes. Flip it over for the right hand set of screws. Then press the bezel into place and you should be done.
[* black] Last step is to reattach the monitor stand with the 8 screws that were removed and then to reattach the plastic bezel that covered them. Here is thata photo of the screws again for aligment reason. Remember theseto show alignment. These are the screw locations for the left hand set of wholesholes. Flip it over for the right hand set of screws. Then press the bezel into place and you should be done.