Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] Carefully turn the MacBook over. With the lower case laying flat, raise the upper case/display assembly to about a 90-100° angle, or use something to prop it open so you don't have to hold it.
-[* icon_note] It's possible to open the case all the way and lay both sides down flat, but this may put undue strain on the connecting cables.
+[* black] Carefully turn the MacBook over, so that the lower case lays flat.
+[* black] Raise the upper case/display assembly to about a 90-100° angle, or use something to prop it up so you don't have to hold it.
+[* icon_note] It's possible to open the MacBook all the way and lay both sides down flat, but this may put undue strain on the remaining connecting cables.