Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Hamza -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_caution] Be sure to slide the metal spudger between the dock connector and the antenna cover, and not into the dock connector itself.
[* black] Insert a metal spudger into the slot between the dock connector and the antenna cover. Gently pry up near the two tabs to create a small gap between the antenna cover and the silver front bezel.
+[* black] make sure you dont brake the clips and get the back parts to

Изображение 1

Старая версия

Новая версия