Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Dennis Clarisse -

На одобрении

До
После
Без изменений

Шаг Линий

+[* black] When putting the lock button back remember to rotate 180º so that the metal handle faces down (towards the back panel).
+[* black] Make sure the power button is working correctly before you reassemble your device.
+[* black] There might be one or two very small pieces of tape on the old power button.
+[* black] Place them between the power button and power button electronics.Those two peaces are needed to press thru so the power button electronics will work correctly.