Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following 3 screws:
[* red] Two 1.5 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4."
[* black] Lift the dock connector assembly up and out of the iPhone.
-[* icon_reminder] When inserting the new assembly, ensure the screw holes of the assembly rest ABOVE the bezel's holes.
+[* icon_reminder] When inserting the new assembly, ensure the screw holes of the assembly rest ***ABOVE*** the bezel's holes.