Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

-[* icon_note] Lay the DVD drive board on the work surface next to the rest of the drive so that it and its cables are out of the way.
+[* icon_note] Lay the DVD drive board next to the DVD drive in such a manner that the cables soldered to the DVD drive board are out of the way (as shown in the picture)
[* red] Remove the single 5.0 mm Phillips screw from the DVD lens EMI shield.