Перейти к основному содержанию

Возврат к шагу #16

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

-[* red] Unscrew and remove the 4.2 mm Phillips screw that secures the white plastic bracket to the lens assembly.
+[* red] Remove the 4.2 mm Phillips screw that secures the white plastic bracket to the lens assembly.
[* black] Lift the bracket off the lens assembly.
-[* icon_reminder] Transfer the white plastic bracket and screw to the new laser lens before installation.
+[* icon_reminder] If you are going to install a new lens, make sure to transfer the white plastic bracket and screw to the new laser lens before installation.