Перейти к основному содержанию

Возврат к шагу #16

Редактировать с помощью ray brenner -

Правка отклонена автор David Hodson

Без изменений

Шаг Линий

[* red] Remove the 4.2 mm Phillips screw that secures the white plastic bracket to the lens assembly.
[* black] Lift the bracket off the lens assembly.
[* icon_reminder] If you are going to install a new lens, make sure to transfer the white plastic bracket and screw to the new laser lens before installation.
+[* black] The new lense will have a bead of solder in the middle of the ribbon cable. You must remove it! Use a soldering iron.