Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.
-[* icon_caution] Throughout the procedure, if you encounter any significant resistance to prying, stop and use the iOpener to reheat the section you're working on.
-[* black] Use the plastic card to pry the right-most battery cell up from the rear case.
+[* icon_caution] Throughout this procedure, be careful not to damage the any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.