Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Gently folding the righ-most battery cells out of the way, insert a plastic card under the right center cell.
-[* black] Push the card in about half of its length to cut the adhesive holding it to the case.
+[* black] Gently folding the right-most battery cells out of the way, insert a plastic card under the right center cell.
+[* black] Push the card in about half of its length to cut the adhesive holding the battery cell to the case.
[* icon_caution] Be sure to avoid the trackpad control board. Aim the card up toward the logic board, where the adhesive is.
+[* black] Leave the card in place to keep the adhesive from re-sealing.