Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #14

Редактировать с помощью Bruno -

Правка одобрена автор Bruno

До
После
Без изменений

Шаг Линий

[title] Removing everything
[* black] Remove the loud speaker from the frame.
[* black] Peel back the dock connector cable from the frame.
[* black] Dot not loose the four spring washers underneath the lightning port housing.
[* black] Pull the rubber boot off the lower microphone area of the dock connector cable.
[* black] Carefully peel the headphone jack filter off the headphone jack housing.
[* black] NOTE: BE CAREFUL not to rip or tear the filter!
[* black] Be sure to transfer all foams pad to the new dock connector assembly if necessary. Good luck ! :)