Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Andrew W. -

Правка одобрена автор Andrew W.

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereCarefully place a suction cup towards the top edge of the iPad
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
[* black] Place an opening pick in the separation to prevent the adhesive from resealing
.
[* black] Insert wisdom hereCarefully place a suction cup towards the top edge of the iPad
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
[* black] Place an opening pick in the separation to prevent the adhesive from resealing
.