Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] Roll your wrist very slightly to gently pullFirmly pull up on the suction cup andto to create a small gap between the front panel and the rear case.
[* black] Roll your wrist very slightly to gently pullFirmly pull up on the suction cup andto to create a small gap between the front panel and the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
[* black] InsertOnce you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.
[* black] InsertOnce you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.