Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #26

Редактировать с помощью Carlos Oulman -

Правка отклонена автор Carsten Frauenheim

До
После
Без изменений

Шаг Линий

[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.
[* red] A pick can be inserted under the logic board just above the battery connector to slightly lift it off the battery connectors.

Изображение 3

Нет предыдущего изображения

Добавлено