Перейти к основному содержанию

Возврат к шагу #7

Отредактированно johnsawyercjs -

Правка одобрена автор Alex Diaz-Kokaisl

До
После
Без изменений

Шаг Линий

[* red] Remove the twelve 4.2 mm Phillips screws securing the LCD assembly to the rear display bezel.
-[* icon_note] Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws nearest to the bottom of the screen (on both left and right). It's easy to damage the cables if not routed properly when putting these screws back on.
+[* icon_note] Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws at the bottom left and right corners of the screen. It's easy to damage the cables if not routed properly when reinstalling these screws.