Перейти к основному содержанию

Изменения к шагу №11

Отредактированно Justin -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Set the lens-flash assembly asideaside.
[* black] Set the lens-flash assembly asideaside.
[* icon_caution] The next step requires the use of a soldering iron. Do not perform this step if you do not have experience soldering, you could permanently damage the mother board
[* black] Desolder thered] De-solder the two soldered ribbon cables attached to the motherboard.
[* black] Separate the motherboard and battery case.
[* black] Desolder thered] De-solder the two soldered ribbon cables attached to the motherboard.
[* black] Separate the motherboard and battery case.

Изображение 1

Старая версия

Новая версия