Перейти к основному содержанию

Изменения к шагу №11

Отредактированно Ross Bryan -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Set the lens-flash assembly aside
[* icon_caution] The next step requires the use of a soldering iron. Do not perform this step if you do not have experience soldering, you could permanently damage the mother board
[* black] Desolder the two soldered ribbon cables attached to the logic boardmotherboard.
[* black] Desolder the two soldered ribbon cables attached to the logic boardmotherboard.