Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Justin -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_caution] Do not completely lift the circuit board off of the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off of the camera will break these soldering points.
[* black] Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge and locatehinge.
[* black] Locate the white ribbon cable attached to the underside of the main circuit board.
[* icon_caution] Do not completely lift the circuit board off of the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off of the camera will break these soldering points.
[* black] Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge and locatehinge.
[* black] Locate the white ribbon cable attached to the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.