Возврат к шагу #5
Редактировать с помощью Justin -
- До
- После
- Без изменений
Шаг Линий
| [* icon_caution] Do not completely lift the circuit board off the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off the camera will break these soldering points. |
| [* black] Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge. |
| [* |
| [* |
| [* red] Gently remove the white ribbon cable from the connector. |