Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Angelo -

Правка одобрена автор Angelo

До
После
Без изменений

Шаг Линий

[* icon_cautionicon_note] Do not completely liftremove the main circuit board offfrom the camera. The circuit board is attached to the top of the camera by aA soldered ribbon cable. Liftingcable still attaches the main circuit board offto the camera willcamera. Complete removal would break thesethe soldering points.
[* black] GentlyIn a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldered attachment points, like a hingesoldering points.
[* red] LocateGently detach the white ribbon cable attached tofrom the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.
[* icon_cautionicon_note] Do not completely liftremove the main circuit board offfrom the camera. The circuit board is attached to the top of the camera by aA soldered ribbon cable. Liftingcable still attaches the main circuit board offto the camera willcamera. Complete removal would break thesethe soldering points.
[* black] GentlyIn a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldered attachment points, like a hingesoldering points.
[* red] LocateGently detach the white ribbon cable attached tofrom the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.