Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Angelo -

Правка одобрена автор Angelo

До
После
Без изменений

Шаг Линий

[* icon_noteicon_caution] Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points.
[* icon_noteicon_caution] Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points.
[* black] In a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldering points.
[* red] Gently detach the white ribbon cable from the underside of the main circuit board.