Перейти к основному содержанию

Changes to Step #3

Edit by Sam Goldheart

Правка одобрена автор Sam Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Pull up on the exposed clear plastic tab to peel the battery off the adhesive securing it to the iPhone.
[* icon_caution] Depending on the strength ofIf the adhesive holdingtab breaks before the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so, you'll need to work the plasticis freed, carefully slide a spudger aroundunder the battery to release the adhesive. Too much pressure exerted at any one point could shortadhesive without puncturing the battery internally rendering it useless (and dangerous)cell.
[* icon_caution] Depending on the strength ofIf the adhesive holdingtab breaks before the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so, you'll need to work the plasticis freed, carefully slide a spudger aroundunder the battery to release the adhesive. Too much pressure exerted at any one point could shortadhesive without puncturing the battery internally rendering it useless (and dangerous)cell.
[* black] Remove the battery.
[* icon_note] Do not remove the plastic tab from the iPhoneblack] Perform a [guide|44534|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting.
[* icon_note] Do not remove the plastic tab from the iPhoneblack] Perform a [guide|44534|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting.