Skip to main content

Changes to Step #3

Edit by Jake Devincenzi

Правка одобрена by Jake Devincenzi

Deleted
Added
Unchanged

Step Lines

[* black] Pull up on the exposed clear plastic tab to peel the battery off the adhesive securing it to the iPhone.
[* blackicon_caution] Depending on the strength of the adhesive holding the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so it will be necessaryso, you'll need to work the plastic spudger around the battery to release the adhesive. Too much pressure exerted at any one point could short the battery internally rendering it useless.
[* blackicon_caution] Depending on the strength of the adhesive holding the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so it will be necessaryso, you'll need to work the plastic spudger around the battery to release the adhesive. Too much pressure exerted at any one point could short the battery internally rendering it useless.
[* black] Remove the battery.
[* icon_note] Do not remove the plastic tab from the iPhone.