Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #6

Редактировать с помощью Travesty -

Правка отклонена автор David Hodson

До
После
Без изменений

Шаг Линий

[* black] After disconnectingWith a spudger lift up the volume button ribbon cable and removing two screws,connection from the top portionmotherboard (it snaps in), a small rectangle piece located just left of the upper case lifts off.top right screw. Remove the screws, remove the plastic top
[* black] After disconnectingWith a spudger lift up the volume button ribbon cable and removing two screws,connection from the top portionmotherboard (it snaps in), a small rectangle piece located just left of the upper case lifts off.top right screw. Remove the screws, remove the plastic top
[* black] This case component houses the power button, LED diffuser, camera port, and speaker grills.
[* black] The two-piece rear case design is a unique choice by Motorola, and makes accessibility and replacement of the inner components much more feasible.
[* black] While the larger lower portion is made of aluminum, the upper part is made of plastic.