Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Richard Suovanen -

Правка одобрена автор Richard Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* orangered] Using Spudger tool, pry the front case from the camera's components.
[* orangered] Using Spudger tool, pry the front case from the camera's components.
[* black] Use your fingers to carefully pull the back case from the front case.
[* redorange] Cut the black and red wires connecting front case to the body of the camera.
[* black] BeingBe careful nothing get'sgets caught, and separate the front case from the camera.
[* blackicon_reminder] To put the new front case back on, solder the wires of the new front case to the components of the camera.
[* redorange] Cut the black and red wires connecting front case to the body of the camera.
[* black] BeingBe careful nothing get'sgets caught, and separate the front case from the camera.
[* blackicon_reminder] To put the new front case back on, solder the wires of the new front case to the components of the camera.

Изображение 1

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия