Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Ani Svadjian -

Правка одобрена автор Dan

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Using Spudger tool, pry the front case from the camera's components.
[* black] Use your fingers to carefully pull the back case from the front case.
[* orange] Cut the black and red wires connecting front case to the body of the camera.
[* black] Be careful to ensure that nothing gets caught, and separate the front case from the camera.
[* black] Be careful to ensure that nothing gets caught, and separate the front case from the camera.
[* icon_reminder] To put the new front case back on, solder the wires of the new front case to the components of the camera.