Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Hormoz Tarevern -

На одобрении

Без изменений

Шаг Линий

[* orange] Using Spudger tool, pry the front case from the camera's components.
[* black] Use your fingers to carefully pull the back case from the the front case.
[* red] Cut the black and red wires connecting front case to the body of the camera.
[* black] Being careful nothing get's caught, separate the front case from the camera.
[* black] To put the new front case back on, solder the wires of the new front case to the components of the camera.
[* black] Follow the steps in reverse order to screw case back on.